ENGINEERING INSIGHTS

Solar in Dhaka is not solar anywhere else, because roofs are crowded, towers cast shade, and trucks crawl through traffic. So the top solar company in Dhaka must solve problems that a rural plant never faces. This guide shows what those problems are. It also shows the checks that tell a strong firm from a weak one. So you can test every offer, including ours.
Dhaka is where the demand is. A Centre for Policy Dialogue (CPD) briefing from August 2026 found that Dhaka division holds 60.4 percent of all net-metered rooftop systems in the country. Chattogram follows with 16.1 percent, and Khulna with 8.8 percent (source).
That demand brings many firms. However, it also brings a range of quality. The same briefing says installation and commissioning practice is uneven, and that quality checks and upkeep are weak. So choosing well matters more here, not less.
If you want the national view first, read our guide to the top solar company in Bangladesh. This page applies the same ideas to the capital.
First, no body ranks solar firms, so "top" is a claim you must test. In Dhaka, a strong firm proves five things:
City experience. It has built on crowded roofs and in tight sites.
Distributor know-how. It knows the approval steps of the local power firms.
Proper design. It sizes the plant to your daytime load, and it models shade.
Approved gear. Its panels, inverters, and meters meet national standards.
Lasting support. It answers calls long after handover.
A firm that scores well on all five is a strong pick, but a firm that scores well on one is a gamble.
City roofs break the textbook layout, so here are the five problems you will meet most.
Shade from neighbours. Tall buildings throw long shadows, and even a thin shadow on one panel can cut the output of a whole string. So a strong firm measures shade through the day and year, then places panels to avoid it.
Crowded roofs. Water tanks, lift rooms, stairwell housings, and dish antennas eat space, so the firm must map the usable area, not trust the building's footprint.
Old structures. Many Dhaka buildings are decades old. Panels add weight, and wind lifts them hard in storms, so ask for a structural note from a qualified engineer.
Dust and grime. City air is heavy with dust, and panels lose output when they get dirty. So cleaning must be part of the plan.
Waterproofing. Anchors pierce roof layers, and poor sealing leads to leaks. So a good crew seals every hole and tests the result.
Two power firms serve most of the capital: DESCO in the north and DPDC in the south. Some outer areas fall under other distributors, and each has its own forms, checks, and timelines.
But approval is where many jobs stall. CPD notes that several agencies, each with its own steps, can delay projects. So ask each firm three questions. First, how many approvals has it won at your distributor? Who files the forms? How long does it expect the process to take?
Net metering rules also shape your plan. Under them, you use your own solar power first, and extra power offsets your bill. The guidelines began in 2018 and were revised in August 2025. Then a good firm explains how they apply to your load, in plain words.
Logistics is a hidden cost in the capital, because heavy trucks face traffic bans, narrow lanes, and long delays. Cranes need street permits. Roof access may be limited to certain hours.
A strong firm plans for this. For example, it schedules deliveries at quiet times and books lifting gear early. It also keeps spares on hand, so a single broken part does not stop the job. Ask each firm how it handles delivery and lifting on your street.
But different buildings need different skills.
Factories and garment units. These sit in belts around Gazipur, Savar, Narayanganj, and Ashulia. They have wide metal roofs and heavy daytime loads, so solar pays well. However, metal roofs need the right clamps and a check of sheet strength.
Offices and malls. Air conditioning peaks at midday, which suits solar. Yet roofs are often small and shared.
Hospitals and universities. They run long hours and cannot afford cuts, so they often need storage or hybrid design as well.
Warehouses and cold rooms. Large flat roofs help. However, night loads may need grid power or a battery.
For these business roofs, see Gtech's commercial and industrial rooftop solar service.
Use these checks on any top solar company in Dhaka. Score each from 1 to 5, then add the results. The top mark is 35.
1. Proof of similar projects. First, ask for finished jobs on roofs like yours. Then visit one, and speak to the owner.
2. A real site study. The firm should visit before it quotes. Then it should check shade, structure, and access.
3. Approved equipment. Panels, batteries, inverters, and meters must meet technical standards set by BSTI and SREDA, according to the power division's rules for the new incentive (source). So ask for datasheets and test reports.
4. Approval record. Also ask how many sign-offs the firm has won at DESCO, DPDC, or your own distributor.
5. Clear pricing. A good quote lists panels, inverters, frames, cables, labour, duties, and VAT. One lump sum hides weak spots.
6. Warranty and service. Panels often carry 25-year output warranties, but inverters carry shorter ones. So ask who handles claims.
7. Safety and trained crews. Work at height is risky. Ask to see the safety plan, and ask if the crews are the firm's own.
Read the total this way: a score of 28 or more marks a strong firm. A score from 21 to 27 means press on the weak spots. Below 21, keep looking.
Also, the site visit tells you most about a firm. A top solar company in Dhaka sends an engineer, not just a salesperson. Expect the visit to cover these points:
The usable roof area, after tanks, lift rooms, and vents.
Shade from nearby buildings at different hours.
The roof's age, strength, and waterproofing.
The route for gear, from the street to the roof.
Your electrical room, meter, and main panel.
Afterwards, the firm should then send a written note with photos and measurements. But if it sends only a price, it did not do the work.
A top solar company in Dhaka rarely shows these signs, so let them slow you down:
A price with no site visit. The firm cannot size what it has not seen.
Wild output promises. Ask how it reached the number.
One lump sum. Itemised pricing shows the real parts.
Pressure to sign today. A fair offer will still stand tomorrow.
Vague answers on approvals. If nobody owns the forms, delays follow.
No references. Good firms are proud of past work.
A price far below the rest. It may mean weak parts or thin support.
One red flag may be a mistake. Three mean you should walk away.
Three slips cost buyers the most. First, they pick on price alone, so weak parts and thin support slip in. Second, they skip the shade study, and the plant then underperforms for years. Finally, they ignore after-sales terms. Output slips quietly, and without a tracking plan nobody notices.
Each mistake is cheap to avoid early. Each is costly to fix once the system is live.
Price alone misleads when you weigh a top solar company in Dhaka, so compare cost against output.
First, take three numbers from each quote: system size in kW, total price, and yearly output. A well-built plant in Bangladesh makes about 1,400 kWh per kW each year. But if a firm claims far more, ask why.
IEEFA puts the possible saving for industrial users at about $0.061 per kWh (source). So each kW saves about 1,400 × $0.061 = $85 a year. Then divide the price per kW by $85 to get a rough payback. For example, $700 per kW gives about 8.2 years. This is an illustration, not a price. Your own bills give a better figure.
Finally, check what is left out. Look for duties, roof repairs, and an inverter swap later. Otherwise, a cheap quote that leaves these out is not cheap.
Planning helps more than hurry, so here is a realistic path for a mid-size business roof. Your dates will differ.
First weeks: site visit, bill review, and a draft design.
Next: final design, signed quote, and approval forms.
Then: gear orders and delivery.
After that: installation, which often takes weeks and not months.
Last: distributor inspection, grid link, and handover.
Delays usually come from forms and late gear, not from the fitting itself. So a firm that names an owner for each step has likely done this before.
Also, a new offer is worth knowing about. Rooftop systems with batteries earn Tk 10.50 per unit for surplus power sent to the grid. The system must be installed by 28 February 2027, and the rate runs to 28 February 2030. Payments arrive every three months.
In Dhaka, where cuts and peak rates hurt, batteries may help. Still, they add cost, so test both cases. If you want the incentive, count back from the deadline and leave room for approvals and delivery.
Bring this list to every meeting:
Who designs the system, and who builds it?
Can I visit a finished project like mine?
How will you handle shade and my crowded roof?
Which brands will you use, and do they meet BSTI and SREDA standards?
How long will approvals take, and who files the forms?
How will you move gear and lift it to my roof?
What yearly output do you expect, and how did you work it out?
Who handles warranty claims, and what do they cover?
How do you track output after handover?
If the system underperforms, what happens next?
Write the answers down. Then compare them across firms. In general, the clearest answers come from the strongest firms.
Gtech Infrastructure is a solar EPC company based in Dhaka. EPC means one team handles engineering, procurement, and construction, so you deal with a single contact. Its services page also lists energy audits, grid integration, storage, and upkeep.
We do not ask you to take our word for it. Instead, use the seven checks and the ten questions on us, too. Ask for a site visit, an itemised quote, and a named contact. A firm that welcomes the test has little to hide.
Also, many buyers own sites in more than one city. If you also build in the port city, read our guide to the top solar company in Chattogram. It applies the same checks to local conditions there.
The top solar company in Dhaka is the one that can prove its work on crowded roofs. It handles shade, structure, approvals, and traffic. It also uses approved gear, and it stays after handover. But the weakest sell a price and vanish.
So take your time, get three quotes, ask the hard questions, and see a finished job. A careful choice now protects 25 years of savings.
view more

Top solar company in Chottogram: how to choose one for your site

Top solar provider in Bangladesh: how to judge one before you sign

Need help choosing?
As land-use pressure increases across Europe, Agri-PV is becoming an increasingly relevant solution.

Rapid Response
Expert Guidance at Every Step
Support